Flexible Resin has an 80A Shore durometer for more rigid flexible parts and prints with a matte black soft touch surface finish. Choose Flexible Resin to create rubberized parts, like ergonomic grips and overmolds for larger assemblies. It has low tensile modulus and high elongation, similar to rubbers found in shoe soles and tire treads.
Additive Technology: SLA
Flexible Resin
Print flexible parts with an 80A Shore durometer.
High Quality Flexible Parts
For rigid flexible parts with a matte black soft finish.
Part Resolutions
50 Micron – 0.05 mm
100 Micron – 0.1 mm
Max Part Size
145 x 145 x 175 mm
( 5.7 x 5.7 x 6.9 in )
Available Colors
Clear
Material Properties
Strength
65%Impact Resistance
50%Heat Deflection
65%Surface Quality
90%Properties
Result
ASTM Test
Tensile Strength
Elongation at Failure
Compression Set
Tear Strength
Softening Point
Shore Hardness
7.7 – 8.5 MPa
75 – 85%
0.40%
13.3 – 14.1 kN/m
446º F
80 – 85 A
D 412-06 A
D 412-06 A
D 395-03 B
D 624-00
D 1525-09
2240
Applications
Wearable parts
Flexible Parts
Rubberized Grips
Functional Prototypes
Rubber Housings & Enclosures
Grips & Overmolded Parts
Rubber Automotive Parts
Soft Jigs, Fixtures & Tooling
Check Out Some Parts
Advantages Of Flexible Resin
Rigid Flexible Parts
Use Flexible Resin to print parts that bend and compress. It’s great for simulating soft surfaces or adding ergonomic features to assemblies.
Exceptional Quality
Print exceptional quality flexible parts at 50 and 100 microns. Use Flexible Resin to print rubberized parts like stamps, grips and even wearables.
Matte Black Surface
Flexible Resin prints with a beautiful matte black surface and has a soft touch finish. It’s a great flexible material for parts and prototypes.